Ugur Sahin develops 999hp Corvette Z03

Ugur Sahin develops 999hp Corvette Z03

Ugur Sahin Corvette Z03 concept fq

Mallett is an understated word when you hear what the company has done with the Ugur Sahin-designed Corvette Z03. Only a pony shy of 1000hp, it’s more like a titanium battering ram swung by the army of Zeus. Since the initial Z03 designs by Ugur Sahin, further revisions have been made to improve engine cooling and increase downforce.

You can have your battering ram in a 700hp supercharged LS7 V8 flavour, or add the hand of a beligerent god and go for the twin-turbo 999hp option.

This is on top of the US$69,000 carbon fibre bodykit it’ll take to convert your existing Z03 into the aggressive monster we see here. Hmmm. Six figures, and still the stock GM interior. If you’ve got that much dough, you’ll want a full interior retrim as well.

Here’s the full spec:
Mallett Z03 700 hp Dead Blow Hammer Conversion US$32,700.00

Technical specifications:
Vortech Supercharger Kit w/ Mallett Modifications
Custom Designed Fuel System Upgrade
Custom Ported LS7 Heads, Flow Matched & CC Matched
Custom Ported / Polished 90mm Throttle Body
Custom Mallett Billet Monster Camshaft
Custom Crower Valve Springs
Custom Crower Titanium Valve Spring Retainers
Cometic Headgaskets
Manley 4340 Chrome-moly Push-rods
2618 Alloy LS Series Pistons & Rings
K1 Technologies Forged Connecting Rods
Clevite 77 Coated Engine Bearings
Professionally Balanced Rotating Assembly Service
Kooks Headers, Cats & X-Pipe
Corsa Touring Muffler System
Mallett Body Graphics & Seat Embroidery
Mallett Custom Shifter
Custom Number Plaque
Custom ECM Calibration With Dyno Tune4.0 C6 ZO6 Corvette 700hpn
Mallett Z03 999 hp APS Twin Turbo Hammer Conversion US$35,795.00

Technical specifications:
APS Twin Turbo Hammer Conversion
Custom Designed Fuel System Upgrade
Custom Ported LS7 Heads, Flow Matched & CC Matched
Custom Ported / Polished 90mm Throttle Body
Custom Mallett Billet Monster Camshaft
Custom Crower Valve Springs
Custom Crower Titanium Valve Spring Retainers
Cometic Headgaskets
Manley 4340 Chrome-moly Push-rods
2618 Alloy LS Series Pistons & Rings
K1 Technologies Forged Connecting Rods
Clevite 77 Coated Engine Bearings
Professionally Balanced Rotating Assembly Service
Mallett Body Graphics & Seat Embroidery
Mallett Custom Shifter
Custom Number Plaque
Custom ECM Calibration With Dyno Tune

Ugur Sahin Corvette Z03 concept fq

Mallett is an understated word when you hear what the company has done with the Ugur Sahin-designed Corvette Z03. Only a pony shy of 1000hp, it’s more like a titanium battering ram swung by the army of Zeus. Since the initial Z03 designs by Ugur Sahin, further revisions have been made to improve engine cooling and increase downforce.

You can have your battering ram in a 700hp supercharged LS7 V8 flavour, or add the hand of a beligerent god and go for the twin-turbo 999hp option.

This is on top of the US$69,000 carbon fibre bodykit it’ll take to convert your existing Z03 into the aggressive monster we see here. Hmmm. Six figures, and still the stock GM interior. If you’ve got that much dough, you’ll want a full interior retrim as well.

Here’s the full spec:
Mallett Z03 700 hp Dead Blow Hammer Conversion US$32,700.00

Technical specifications:
Vortech Supercharger Kit w/ Mallett Modifications
Custom Designed Fuel System Upgrade
Custom Ported LS7 Heads, Flow Matched & CC Matched
Custom Ported / Polished 90mm Throttle Body
Custom Mallett Billet Monster Camshaft
Custom Crower Valve Springs
Custom Crower Titanium Valve Spring Retainers
Cometic Headgaskets
Manley 4340 Chrome-moly Push-rods
2618 Alloy LS Series Pistons & Rings
K1 Technologies Forged Connecting Rods
Clevite 77 Coated Engine Bearings
Professionally Balanced Rotating Assembly Service
Kooks Headers, Cats & X-Pipe
Corsa Touring Muffler System
Mallett Body Graphics & Seat Embroidery
Mallett Custom Shifter
Custom Number Plaque
Custom ECM Calibration With Dyno Tune4.0 C6 ZO6 Corvette 700hpn
Mallett Z03 999 hp APS Twin Turbo Hammer Conversion US$35,795.00

Technical specifications:
APS Twin Turbo Hammer Conversion
Custom Designed Fuel System Upgrade
Custom Ported LS7 Heads, Flow Matched & CC Matched
Custom Ported / Polished 90mm Throttle Body
Custom Mallett Billet Monster Camshaft
Custom Crower Valve Springs
Custom Crower Titanium Valve Spring Retainers
Cometic Headgaskets
Manley 4340 Chrome-moly Push-rods
2618 Alloy LS Series Pistons & Rings
K1 Technologies Forged Connecting Rods
Clevite 77 Coated Engine Bearings
Professionally Balanced Rotating Assembly Service
Mallett Body Graphics & Seat Embroidery
Mallett Custom Shifter
Custom Number Plaque
Custom ECM Calibration With Dyno Tune

« | »

Let us know what you think

Loading Facebook Comments ...

Road Tests

Silver Sponsors

Car and SUV Team

Richard-Edwards-2016Richard Edwards

Managing editor

linkedinphotoDarren Cottingham

Motoring writer

robertbarry-headRobert Barry

Chief reporter

Ian-Ferguson-6Ian Ferguson

Advertising Consultant

debDeborah Baxter

Operations Manager

RSS Latest News from Autotalk

RSS Latest News from Dieseltalk

Read previous post:
Reiter Engineering Gallardo LP560 – the ultimate Gallardo?

The latest Lamborghini LP560-4 looks like a pretty mean piece of kit. Until you stand it next to Reiter Engineering's...

Close